FibberservCL FSSEG-X3 User Manual page 6

3.2 Connect to Gateway's network
1: Power on the Door/Window Sensor. Press the reset button and the LED indicator will flash red
three times indicating the sensor is ready to join the gateway's network
2: Select "Add new devices" in the app menu.
!
Tip: You can also press the "Z" button of the gateway for two seconds until the LED indicator turns
solid blue.
3: The sensor will join the gateway's network automatically. The LED indicator will flash green for
three times when it has successfully joined.
4: Now you can see the Door/Window Sensor under the Security Tab in the mobile app.
!