Table of Contents
Advertisement
TRUE SENSE OF SECURITY
FSDWS312 ZigBee Door/Window Sensor
Quick Start Guide
1. Introduction
The FSDWS312 Door/Window Sensor detects if your door or window is open or closed. It allows
you to receive notifications remotely from the mobile app and can be used to trigger an alarm.
2. Get to know your device
2.1. FSDWS312 at a glance
!
2.2. Reset button
Press and hold the reset button for ten seconds until the LED indicator flashes green three times to reset to
default factory setting.
2.3. LED Indicator
The LED indicator status is as below:
LED Status
Red LED flashing three times
Green LED flashes three times
Red LED flashes once
3. Get started
3.1. To get started, you will need:
FSSEG-X3 Smart Gateway
•
FSDWS312 Door/Window Sensor
•
The Fiberserv mobile app
•
What it means
Device has not joined a network.
Joining a network or return to factory settings.
Alarm is triggered
Advertisement
Table of Contents
