FibberservCL FSSEG-X3 User Manual page 46

Used to display corresponding information while operating:
• Brand information
• Pairing code information
2.4. LED Indicator
The LED indicator status is as below:
!
3. Get started
To get started, you will need:
• FSSEG-X3 Smart Gateway
• FSAC201 Split AC Control
• The Fiberserv mobile app
Then follow the steps below:
Step 1: Insert the AC201 Split AC Control into a power socket facing your air conditioner that you
would like to connect to.
See the diagram below to guide you in selecting a suitable position in the range of the grey bars.
Wait for the LED indicator to turn solid red.
!
Tip: If the LED indicator is not in solid red then please press and hold the reset button for about ten
seconds until the display shows "rst" to return it to the factory default settings.
Step 2: Select "Add new devices" in the menu of the app.