Table of Contents
Advertisement
COST SAVINGS & ENERGY EFFICIENCY
FSWSP404 Smart Plug US
Quick Start Guide
1. Introduction
The Smart plug FSWSP404 allows you to switch your devices on and off and allows you to
measure power and record total used power in kilowatt hours (kWh) wirelessly via your mobile App.
• Converts any home appliance into a 'smart' device, such as lamps, heaters, fans, window A/
Cs, etc.
• Controls your home devices on/off globally via the mobile app.
2. Get to know your device
2.1. FSWSP404 at a glance
!
Reset button
• Reset. Press and hold the Reset button for ten seconds until the LED indicator flashes three times
to restore the smart plug to default factory settings.
• Pair mode. Press and hold the Reset button for about three seconds until the LED indicator
flashes three times. Then, you can pair the lighting switch with another device.
LED indicator
The LED status gives the following information:
Advertisement
Table of Contents
