!
3. Get started
To get started, you will need:
A SEG-X3 Smart Gateway
•
•
1 to 4 of CCT Tunable LED bulb LED622 (You will need at least one LED bulb)
The mobile app
•
Then follow the steps below:
Step 1: Check the FSRC204 status.
Press any button to check if the main LED indicator flashes red for three times.
Tip: if not, please return it to default factory settings by using a pin key tool to press and hold the
reset button for ten seconds until the LED light flashes twice. The main LED indicator should flash
fast around ten times.
Step 2: Select "Add new devices" in the menu of the app.