FibberservCL FSSEG-X3 User Manual page 29

LIFE SAVING/AVOID MAJOR DISRUPTIONS
FSWLS306 Water Leak Sensor
Quick Start Guide
1. Introduction
The Water Leak Sensor uses an extra low power consumption ZigBee wireless module, and
features a long battery life. The separate design of body and sensor makes it able to be mounted to
keep the main body safe away from moisture
2. Get to know your device
2.1. FSWLS306 at a glance
2.2. Reset button
Join the ZigBee gateway. Press and hold the reset button for two seconds until the LED indicator
rapidly flashes yellow to join the gateway.
Reset. Press and hold the reset button for five seconds until the LED indicator flashes yellow six
times to reset the sensor to default factory setting.
Battery pull tab
Power on Water Leak Sensor. Pull out the battery pull tab to power on the sensor.
3. Get started
3.1. To get started, you will need:
FSSEG-X3 Smart Gateway
•
FSWLS306 Water Leak Sensor
•
The Fiberserv mobile app
•
3.2 Connect to gateway's network
!