6.3
The functions in the "Inventory" menu
In the "Inventory" menu, transponders can be identified in the antenna field of the RF650M
and when necessary also saved in a file.
Statistics
In the "Statistics" tab, the current settings for taking inventories are displayed. If you start
scanning, the number of identified transponders and the identification rate are displayed.
Figure 6-2
The properties displayed in this tab are specified in the "Settings" menu.
The properties shown here "Pwr", "Session", "Rounds" and "Q" are described in the section
"The functions in the Settings menu".
SIMATIC RF650M mobile reader
Operating Instructions, 04/2015, C79000-G8976-C404-01
"Statistics" tab in the "Inventory" menu
"RF650M" software
6.3 The functions in the "Inventory" menu
41