"RF650M" software
6.2 Menu overview and functions
6.2
Menu overview and functions
After the "RF650M" software has been started, the "Main Menu 1" is displayed. The main
menu is divided into "Main Menu 1" and "Main Menu 2".
Figure 6-1
Table 6- 1
Menu
Inventory
Tag Editor
Tag Locator
Tag Info
Settings
Channel Scanner
Help
Click the "Select" button to open the selected menu. Click on "Exit" to end the "RF650M"
software and to return to the operating system.
40
"Main Menu 1" and "Main Menu 2"
The menus of the "RF650M" software
Description
Starting/stopping scanning
•
Display of the recognition rate
•
Overview of the identified transponders
•
Starting/stopping scanning
•
Reading out and writing transponder data
•
Locking and unlocking memory areas
•
Assigning passwords
•
Starting/stopping scanning
•
Overview of the identified transponders
•
Transponder localization based on the received signal strength
•
Starting/stopping scanning
•
Information on the memory configuration and content of the transponder and
•
the transponder type
Adaptations and settings for the "RF650M" software
•
Starting/stopping scanning
•
Display of the wireless channel occupation
•
Contact data for Siemens Support
•
SIMATIC RF650M mobile reader
Operating Instructions, 04/2015, C79000-G8976-C404-01