"RF650M" software
6.7 The functions in the "Settings" menu
Inventory
In the "Inventory" tab, you can make settings for the inventory (identification) of
transponders. It is recommended that you do not change the values but leave the setting at
"Auto". You will find a detailed description of the inventory parameters in the specification
ISO 18000-6C or in the EPC Global Class 1 Gen2 standard.
Figure 6-14
Table 6- 12
Parameter
Session
Query rounds
Q-value
56
"Inventory" tab in the "Settings" menu
Parameters of the "Inventory" tab
Setting options
0
•
1
•
2
•
3
•
Auto
•
1
•
2
•
...
•
9
•
10
•
Auto
•
1
•
2
•
...
•
14
•
15
•
Default value
Description
0
The description can be found in the
wireless standard ISO 18000-6C.
This setting should only be
changed by experienced and
trained RFID users.
Auto
The description can be found in the
wireless standard ISO 18000-6C.
This setting should only be
changed by experienced and
trained RFID users.
Auto
The description can be found in the
wireless standard ISO 18000-6C.
This setting should only be
changed by experienced and
trained RFID users.
Operating Instructions, 04/2015, C79000-G8976-C404-01
SIMATIC RF650M mobile reader