Table of Contents
Advertisement
Parameter
Write
Read
6.5
The functions in the "Tag Locator" menu
In the "Tag Locator" menu, you can find out the position of a transponder. The principle on
which this functions is comparable to a metal detector.
Easy
In the "Easy" tab, you can control the search.
Follow the steps below to find out the position of a transponder:
1. Press the "Scan" button to start scanning.
2. Stop the scanning as soon as the required transponder has been identified and its ID
appears in the transponder list.
3. From the transponder list, select the transponder whose position you want to locate.
4. Press the "Scan" button to start the search.
Reaction: The view of the tab changes to the locate mode.
5. Now move through the room with the RF650M moving the reader.
As soon as the reader identifies the selected transponder this is signaled both optically
and acoustically. The reader shows the received signal strength with which the target
transponder was identified. Based on the displayed signal strength, you can "work your
way" to the selected target transponder and localize it.
SIMATIC RF650M mobile reader
Operating Instructions, 04/2015, C79000-G8976-C404-01
Setting options
Default value
--
--
--
--
6.5 The functions in the "Tag Locator" menu
Description
Writes the displayed password to
the selected target transponder.
Reads out the password from the
selected target transponder.
"RF650M" software
49
Advertisement
Table of Contents
