The Functions In The "File" Menu; Loading A File; Save - Siemens SIMATIC RF310M Operating Instructions Manual

Simatic sensors rfid systems mobile reader
Hide thumbs Also See for SIMATIC RF310M:
Table of Contents

Advertisement

SIMATIC RF310M software

6.4 The functions in the "File" menu

6.4
The functions in the "File" menu
The following file functions are available that you can select in the menu via "Tag" (or
<ALT+F>):
● Load
● Save
● Exit
Figure 6-2
6.4.1

Loading a file

You can load a file from the "Flash Disk" folder via "File > Load" (or <ALT+F+L>) if the file
● has previously been saved with the command "File > Save" or
● has been transferred from the PC to the "Flash Disk" folder of the PSION Workabout Pro
All the files of the "Flash Disk" folder are displayed. You can select the desired file via the
touchscreen or by entering the filename under "Name" and <OK>.
6.4.2

Save

Via "File > Save" (or <ALT+F+S>), you can save data currently displayed in the editor of the
Mobile Reader to a file on the PSION Workabout Pro.
The filename can be up to 20 (alphanumeric) characters in length. When saving, the
extension ".HEX" (data) is automatically added to the filename [see also Copying data from
and to the Mobile Reader (Page 50)].
28
The file functions
[see also Copying data from and to the Mobile Reader (Page 50)].
Operating Instructions, 07/2007, J31069-D0191-U001-A1-7618
SIMATIC RF310M Mobile Reader

Advertisement

Table of Contents
loading

Table of Contents