Table of Contents
Advertisement
The "Shutdown" window provides more options than simply shutting down the device. The
default option changes the mobile reader to a status in which power consumption is at its
lowest (idle mode). The key sequence "On/Off button" and "Activator key" is adequate to turn
off the device.
Table 5- 2
Options
Sleep
Warm Boot
Cold Boot
Reload Windows CE
Power Off
Default when the mobile reader is not in the charging station.
1)
Default when the mobile reader is in the charging station.
2)
SIMATIC RF650M mobile reader
Operating Instructions, 04/2015, C79000-G8976-C404-01
Shutdown options of the reader
Description
The device changes to the idle
1)
mode. After exiting the idle mode, the
reader starts in the last active menu
entry before the On/Off button was
pressed.
The content of memory and unsaved
2)
registry contents are retained (includ-
ing RAM memory). All unsaved data
in all running programs is lost.
The content of the RAM memory is
deleted and the device is reset to its
initial status. All unsaved registry
entries are lost.
RAM is deleted and the device is
reset to its initial status. All unsaved
registry entries are lost. The device
loads Windows CE from the flash
memory into RAM.
The device is completely turned off.
Select this option if you need to store
the device for a longer period of time
without loading it.
5.1 The keypad
Remark
Note 1:
The power management in the Con-
trol Panel influences the depth of the
idle mode. For more information,
refer to the section "Power Manage-
ment (PM) (Page 29)".
Note 2:
The device does not change to the
idle mode when it is in the docking
station.
Note 1:
The device retains all settings also
those that have not been saved.
Windows CE is simply restarted.
Note 2:
Some applications/functionalities
need to be restarted so that the new
settings are valid.
Note 3:
Do not reopen the PAK files.
Note 1:
Restart Windows CE and delete all
the settings that have not been
saved.
Note 2:
Open all PAK files.
Note 1:
Load Windows from the flash and
then perform a "Cold Boot".
Note 1:
Mode for long-term storage to protect
the battery from total drainage.
Note 2:
Wakes up "Reload Windows CE".
Operation
37
Advertisement
Table of Contents
