"RF650M" software
6.4 The functions in the "Tag Editor" menu
Mem
In the "Mem" tab, you can read and write all memory areas of the selected target
transponder.
Figure 6-7
Table 6- 6
Parameter
Target Tag
Bank
Start [B]
Length [B]
Data
Complete
46
"Mem" tab in the "Tag Editor" menu
Parameters of the "Mem" tab
Setting options
--
Reserved
•
EPC
•
TID
•
User
•
0 ... 65535
0 ... 65535
HEX
•
DEC
•
☐ / ☑
Default value
Description
--
EPC ID of the selected target tran-
sponder
EPC
Selection of the memory area
(memory bank) from which data is
read out or to which data is written.
0
Start address in bytes from which
data is read out/written to.
The maximum value depends on
the memory size of the transpond-
er.
0
Number of bytes to be read out or
written starting at the start address.
The maximum value depends on
the memory size of the transpond-
er.
HEX
Representation of the data in hex-
adecimal or decimal format. To
change the format click on
"[HEX]/[DEC]".
☑
Check box to read out or to write to
the complete memory area
(memory bank).
Operating Instructions, 04/2015, C79000-G8976-C404-01
SIMATIC RF650M mobile reader