Reference Information; Tp Cable Termination - Extron electronics USB Extender Tx User Manual

Reference
Information
This section provides information on the following subjects:
•
•

TP Cable Termination

NOTES:
Figure 9 shows the recommended termination of TP cables with RJ-45 connectors.
NOTE: Terminate both ends of a cable identically, in
Figure 10.
NOTE: Do not use Extron UTP23SF-4 Enhanced Skew-Free™ A/V UTP cable to link
TP Cable Termination
Mounting the USB Extender
• RJ-45 termination with CAT 5, CAT 5e, CAT 6, CAT 6e, and CAT 7 cable must
comply with the TIA/EIA T 568A or TIA/EIA T 568B wiring standard for all
connections.
• The transmitter and receiver pair work with unshielded twisted pair (UTP) or
shielded twisted pair (STP) cables; but to ensure FCC Class A and CE compliance,
STP cables are required.
• Terminate both ends of the cable identically, in accordance with either the TIA/EIA
T 568A or the TIA/EIA T 568B wiring standard.
RJ-45
Pins:
Connector
1 2 3 4 5 6 7 8
Pin 568 A
1
White-green
2 Green
3 White-orange
4 Blue
5 White-blue
6 Orange
7 White-brown
Insert
8 Brown
Twisted
Pair Wires
TP Cable Termination
accordance with either the TIA/EIA T 568A or the
TIA/EIA T 568B wiring standard.
the transmitter and receiver. Skew-free A/V cable is designed for Extron TP transmitter
and receiver A/V applications. The USB Extender Series will not work properly with this
cable.
568 B
White-orange
Orange
White-green
Blue
White-blue
Green
White-brown
Brown
USB Extenders • Reference Information
13