Medium
Pressure switch identification
Pressure switches can be identified by colored sticker label attached to one of their sides.
PRESSURE SWITCH WITH GRAY LABEL – WWD22A MODEL
Note: Pressure switch, with others colors sticker label, can not be used in this model
TEST
In order to test pressure switch, just measure continuity between terminals described below; the results for
each measurement must be as described:
TERMINALS
NOT ACTIVATED
11 / 13
21 / 23
DISMOUNTING
The Pressure Switch is fastened to the Dispenser through a plug-in
system. You have only to press the lock and pull it outwards to
release
it.
MSEX0060i
High
MEDIUM LEVEL
with continuity
no continuity
no continuity
High Level: The water reach the Balance Ring
Medium Level: The water reach until 5 hole rows below the
Balance Ring
with continuity
with continuity
no continuity
HIGH LEVEL
16