Page 1
Dosing Aid This function will suggest to you the correct amount of detergent for your wash load. By using the Dosing Aid you avoid detergent overdosing and • save detergent • protect the environment • protect sensitive skin Before the first use... Compare the dosing recommendation of the detergents you use with the dosing values preset in the washing machine.
Page 2
B - Adjust (Detergent Calibration) Select a programme belonging to the programme group for which you want to check and possibly adjust the preset dosing value (for example the “Cotton” programme for the “Generic” group). Press and hold the “Dosing Aid” button The bottle symbol on the display lights up, Compare the preset value indicated on Press the “Ok”...
Page 3
2. Water hardness A - Check your local water hardness Washing with “hard water” requires more detergent than washing with “soft” water, this is why you have to check if the preset water hardness matches your regional water hardness. To find out your local water hardness, ask your local water supply authorities, or use the test strip attached to the Calgon Leaflet provided with your washing machine (if available): Tear off the edge of the paper sleeve and Dip the strip into tap water for only 1 Shake off the excess water immediately.
Page 4
Dosing Aid - DAILY USE Load the washing Select the desired Select “Dosing Aid” and start the washing After approximately ten seconds the washing Add the recommended detergent amount to Start the wash process. machine with laundry. programme. Add any machine.
Need help?
Do you have a question about the WWDC 8420/1 and is the answer not in the manual?
Questions and answers