Table of Contents
Advertisement
-
Position the Gearcase in the Tub base;
-
-
Position the Device on the Tub Support by fastening the
bolts (A) and screws (B) as mentioned by dismounting
process.
To release the Belt, you have only to loose the Motor fastening screws and displace it towards the Pulley.
To release both the Motor Pulley and the Mechanism Pulley, hold the Belt as indicated in the figure below, in
order to lock the aforementioned parts, thus being able to perform the task.
MSEX0060i
D – Mounting Shaft
D
-
Place the Lever so it matches with the holes in the Mounting
Shaft and Center Shaft and rotate it in the clockwise direction
until the mounting shaft edge nearly touches the Device's body.
B
A
27
Advertisement
Table of Contents
