Table of Contents
Advertisement
CALLED
Water Leakage / Water
level Overflow.
Noise, Vibration.
MSEX0060i
CAUSE
Clothes put in after water filling.
Inlet hose improper connected.
Outlet hose improper connected.
Pressure switch contacts with problems or
pressure switch hose loose/damaged.
Pressure switch, wires broken.
Seal damaged.
Rubber seal damaged.
Inlet valve opened.
ELECTRONIC CONTROL (PCB) with
problems.
Unleveled washer.
Improper cloth distribution inside of Basket.
Too many clothes.
Wiring harness hitting the Cabinet (internal)
Hose, outlet hitting the Cabinet (external).
Cams assembly scratching.
Oil leakage through inlet axle.
Mechanism assembly inlet axle with play.
Seal damaged.
Bearing damaged.
Brake lining worn.
Suspension Bar Connecting Rod broken.
Stap Snubber broken.
Suspension bar broken or warped.
SOLUTION
Put in clothes before water filling.
Install hose correctly.
Install hose correctly.
Check continuity , as suggested in
Pressure Switch test topic. Also
check their hose visually, or
replace it.
Measure continuity between
involved wires. (R = 0).
Replace Seal.
Replace Rubber seal.
Replace Inlet Valve.
Replace the Electronic board
(PCB).
Adjust the feet leveler.
Guide consumer to distribute
clothes correctly.
Put in only recommended weight
of clothes.
Fix the Wiring harness.
Fix the Hose.
Check spring and cam/traction
arm assembly.
Check mechanism assembly.
Check mechanism assembly.
Replace Seal.
Replace bearing.
Replace brake lining.
Replace Connecting Rod.
Replace Stap Snubber.
Replace Suspension Bar.
36
Advertisement
Table of Contents
