Fasel Elektronik FCU2000-IR series Operating Manual page 22

"General settings" menu







Fig. 5: View "Set colour light – change mode" (example)
5.
6.
7.
8.
9.
10. Select option "manual" or "auto". "Manual / Auto" line is enabled. The options
11. Press the
12. Exit the menu using the
13. If the option "auto" is selected, the line "colour program no." is displayed. Select
22
Select one of the following lines with the
– OFF / ON
– Manual / Auto
– Colour program
– Lamps
Press the key. Selected line is enabled.
Select option OFF or ON. "OFF / ON" line is enabled.
– OFF is enabled.
- Key: without function
- Key: Select "ON".
– ON is enabled.
- Key: Select "OFF".
- Key: without function
Press the key. The selection is saved.
Exit the menu using the
"manual" or "auto" do only work if the "ON" option is enabled.
– "manual" is enabled.
Key: without function
Key: Select "auto".
– "auto" is enabled. The symbol "auto" (symbol no. 10) appears in the display.
Key: Select "manual".
Key: without function
key. The selection is saved.
key.
"colour program no." and enable.
– "1" is displayed for "colour program no."
Key: without function
Operating manual Series FCU2000/3000/4000-IR


or key:




key or select the next line with the
key or select the next line with the
(→ point 7)
(→ point 10)
(→ point 13)
(→ point 16)
or key.
or
B_FCUxxxx-IR / Version V 1.07