7.2.3
Colour light automatic (only for menu "Pro")
In this menu you can program the sequence, if you have selected the "Auto" option in
the "Colour light mode". → See operating instructions for program settings.
1.
2.
Fig. 17: "Colour light automatic" view (example)
3.
4.
Fig. 18: "Colour light automatic – change mode" view (example)
5.
6.
B_FCUxxxx-IR / Version V 1.07
Note!
The "Colour light automatic" menu is only available for control devices
with the extension board type FCU-EXT-COLOR LIGHT or a RGB-LED
control from the company Licht2000.
Press (basic settings)
Press the
key until you see the following view:
Press the
key.
Following view is displayed:
Select one of the following lines with the
– Colour program no.
– Program step
– Duration in min
– Adjusted colour
Press the
key. Selected line is enabled.
Operating manual Series FCU2000/3000/4000-IR
key. The lamp next to the key must light up.
or
„Basic settings" menu
key:
(→ point 16)
(→ point 7)
(→ point 10)
(→ point 13)
31