Select Program (Only For Fcu4Xxx); Adjust Display Lighting (Not For Fcu2Xxx) - Fasel Elektronik FCU2000-IR series Operating Manual

„Basic settings" menu
9.
10. Select desired weekday. Check mark flashes.
11. Press
12. Leave menu with
7.1.2

Select program (only for FCU4xxx)

In this menu you can select 1 of 8 programs.
1. Press key "basic settings". The lamp next to the key must light.
2. Press







Abb. 10: View "select program" (example)
3. Press
4. Select desired program with the keys
5. Confirm with key
7.1.3

Adjust display lighting (not for FCU2xxx)

In this menu you adjust the brightness of the display.
1.
2.
26
Exit the menu by using the
Press -key: move cursor left.
Press -key: move cursor right.
-key. Selection is saved.
-key.
Note!
For each mode there exist 8 programs which are freely adjustable. .
The program numbers are shown on the display. (These 8 freely ad-
justable programs may be locked by the service engineer.)
-key until the following view is shown:
-key
Press (basic settings)
Press the key until you see the following view:
Operating manual Series FCU2000/3000/4000-IR
-key or select the next line with the
Not available with FCU2000 and
or.
key. The lamp next to the key must light up.
or -key.
FCU3000
B_FCUxxxx-IR / Version V 1.07