Adjust Display Contrast (Only For Fcu4Xxx); Light Settings (Only For Menu "Pro") - Fasel Elektronik FCU2000-IR series Operating Manual

Fig. 11: "Display lighting" view (example)
3.
4.
5.
6.
7.
7.1.4

Adjust display contrast (only for FCU4xxx)

In this menu you can change the contrast of your display.
1.
2.
Fig. 12: View "light settings" (example)
3.
4.
5.
7.1.5

Light settings (only for menu "Pro")

In this menu you can set the time, when the light should go on and how long it should
stay on after the end of a mode.
B_FCUxxxx-IR / Version V 1.07







Press the key.
Value flashes.
Adjust the desired value:
Press the key: Reduce value.
Press the key: Increase value.
0: dark
9: bright
Press the key. The adjusted value is accepted.
Exit the menu using the
Press key "basic settings". The lamp next to the key must light.
Press the -key until the following view is shown:







Press -key.
Select desired contrast with the keys
Press -key to confirm selection.
Operating manual Series FCU2000/3000/4000-IR


key.
Not available with FCU2xxx and FCU3xxx
or .
„Basic settings" menu

27