"General settings" menu
The control devices are delivered with a maximum adjustable heating time of 6 hours. If
you need heating times exceeding 6 hours, please contact the installer or the dealer of
your sauna system.
6.4
Menu for Options
6.4.1
RGB-LED brightness (only for FCU4xxx and menu "Pro")
In this menu you can set the brightness of the RGB-LEDs.
1.
Fig. 3: View "RGB-LED brightness"
2.
3.
4.
6.4.2
Colour light mode (including parameter description)
In this menu, you can adjust the coloured lights. The following table shows the parame-
ters and their explanations.
20
NOTE!
The "RGB-LED brightness" menu is only available for control devices
which are connected to a RGB-LED control from the company
Licht2000.
-Press the key until you see the following view:
Press
key.
Select RGB-LED brightness. Digit flashes.
Press the
key: Increase value.
Press the
key: Reduce value.
There are 4 brightness levels possible.
Press the
key. The selection is saved.
NOTE!
The "Colour light mode" menu is only available for control devices with
the extension board type FCU-EXT-COLOR LIGHT or a RGB-LED con-
trol from the company Licht2000.
Operating manual Series FCU2000/3000/4000-IR
Not available with FCU2000 and
FCU3000!
B_FCUxxxx-IR / Version V 1.07