Adjust Heating Time; Adjust Timer; Maximum Allowed Heating Time - Fasel Elektronik FCU2000-IR series Operating Manual

3.
4.
5.
6.3.2

Adjust heating time

1.
2.
3.
4.
5.
6.3.3

Adjust timer

1.
2.
3.
4.
5.
6. For turning off the timer, please turn off the control unit or press mode-key once for
6.3.4

Maximum allowed heating time

After starting a mode, the remaining heating time is displayed in place of the full heating
time. The heating time can be changed only in standby mode.
The EN 60335-2-53 "Specific requirements for sauna heating devices" allows the follo-
wing maximum heating times:
Max. heating time
more than 12 hours
max. 12 hours
max. 6 hours
Table: 7 Maximum heating time
B_FCUxxxx-IR / Version V 1.07
Press -key. The last digit flashes.
Select desired value:
Press -key to reduce value.
Press -key to increase value.
Note!
After the digit „9" or „0" the higher digit of the temperature value is changed. That is:
"40" is displayed after "39".
You can also select the higher digit using the
Press -key to confirm value
Press the -key until the symbol
Press the -key
Adjust the desired value (see above)
Press the -key to accept value
Key "mode" flashes
Press the -key until the symbol
Adjust desired time (see above)
Press the -key to adjust the value.
Press the mode-key (flashes)
Symbol flashes.
starting and once again for stopping.
Operating manual Series FCU2000/3000/4000-IR
"General settings" menu
-key or
(adjust heating time) lights up.
(adjust timer) lights up.
Description
Public cabins which are supervised by trained
personnel.
Hotels, apartment blocks, etc.
All other cabins / private households
-key and change then.
19