"General settings" menu
Fig. 6: View "colour light start"
3.
4.
Fig. 7: View "Set colour light start – change mode" (example)
5.
6.
7.
24
Press
key or
-key.
Following view is displayed:
Select one of the following lines with the
– If power ON
– On heat-up phase
– If bath his ready
Press the
key. Selected line is enabled. The selection is saved. Check mark be-
hind the cursor is placed.
Exit the menu using the
NOTE!
If the key is not operated for a few seconds, the program automatically
goes back to the "main" view. (If the controller has a timer and it is ac-
tive, he jumps into the timer menu.)
Operating manual Series FCU2000/3000/4000-IR
or
key:
key. The view "colour light start" (Fig. 6) is displayed.
B_FCUxxxx-IR / Version V 1.07