Fasel Elektronik FCU2000-IR series Operating Manual page 21

Parameter
OFF / ON
Manual / Auto
Colour program
Lamps
1 / 2 / 3 / 4
Table: 8 Parameter description menu "mode colour light"
1.
2.
Fig. 4: View "colour light mode"
3.
4.
B_FCUxxxx-IR / Version V 1.07
Select "colour light mode".
Following view is displayed:







Press key or -key.
Following view is displayed:
Operating manual Series FCU2000/3000/4000-IR
Description
OFF: The colour light mode is off.
ON: The colour light mode is on. The colour lights are
controlled either directly (manual) or by an automatic
program (auto).
The option "ON" must be selected.
Manual: The colour lights are manually controlled us-
ing this "Colour light mode". See parameters "1 / 2 / 3
/ 4".
Auto: The colour lights are controlled automatically.
Select the desired colour program using the parame-
ter "colour program". For the "Auto" option, you can
make further adjustments in the "Colour light auto-
matic" menu.
The options "ON" and "auto" must be selected. 2 colour
programs are available. These programs can be setup in
the menu. "basic settings"
The options "ON" and "manual" must be selected.
Depending on the settings in the service menu, you can
select single or mixed colours.
Single colours are: 1 / 2 / 3 or 4.
Mixed colours are combinations of two colour lights. The
following combinations are possible: 1 + 2 / 2 + 3 or 3 +
4.


"General settings" menu
21