Repeater Deployment Rules; Table Of Contents - Tynetec Advent xt Installation Manual

31. KIRK 400 SOLO BASE DECT ‐ REPEATER DEPLOYMENT

REPEATER DEPLOYMENT RULES


A maximum of 6 Repeaters can be configured on a Kirk 400 Solo Base Wireless Server (KWS400) RPN 3

A maximum of 3 Repeaters can be configured in a chain

If you have up to 3 Repeaters they should be numbered: 67, 131 and 195 i.e. RPN 3 +64, +128 and +192

If you have more than 3 Repeaters they should be assigned one of the following: 35, 67, 99, 131, 163, 195 & 227

2 Repeaters cannot have the same number

See deployment examples below; RPN = the Radio Part Number
KWS400 is shaded RED Repeaters are shaded GREEN Radio handover BLUE
Solo Base
RPN 3
1 REPEATER DEPLOYMENT
1 Repeater connected directly:
Solo Base
RPN 3
2 REPEATER DEPLOYMENT EXAMPLES
2 Repeaters connected directly:
Repeater
RPN 67
2 Repeaters connected in a chain:
Solo Base
RPN 3
3 REPEATER DEPLOYMENT EXAMPLES
3 Repeaters connected in a chain:
Solo Base
RPN 3
1 Repeater connected directly and 2 in a chain:
Repeater
RPN 67
Doc No. FM0410 issue M‐1 Page 47
Repeater
RPN XX
Repeater
RPN 67
Solo Base
Repeater
RPN 3
RPN 131
Repeater Repeater
RPN 67 RPN 131
Repeater Repeater
RPN 67 RPN 131
Solo Base Repeater
RPN 3 RPN 131
Repeater
RPN 195
Repeater
RPN 195