30. KIRK 400 SOLO BASE DECT
The Kirk 400 solo base option is suitable for small sites using a single base station and up to 6 repeaters.
Up to 12 DECT telephones can be used on a Solo Base system.
KIRK 400 SOLO BASE CONFIGURATION
700VA
UPS
External Tel Line
Advent xt Line
Desk CLI Telephone
PART NUMBERS
Part No.
ZXT548
ZXT556
ZXT502
ZXT503
ZXT512
ZXT523
ZXT524
ZCS766
ZCS729
W00525
F00040
POWER CONNECTION
To maintain DECT operation during a mains failure both the Matrix and PoE injector must both be powered from the
700VA UPS, the Repeaters must be powered from a battery backed 12V DC power supply.
If the Matrix and PoE injector are plugged directly into the mains and Repeaters are powered via in‐line PSU modules there
will be no DECT coverage during a mains failure; however the fixed CLI desk telephone will still operate.
PoE INJECTOR CONNECTION
The PoE injector provides Power over Ethernet for the Kirk 400 Wireless Server (Solo Base).
POWER ‐ connect to the UPS (or directly to the mains supply) using the lead provided.
ETHERNET ‐ connect to the Matrix ETHERNET socket
ETHERNET & PoE ‐ connect to the Kirk 400 Solo Base via an RJ45 patch lead or up to 100 metres of 4 pair Cat 5e cable.
Doc No. FM0410 issue M‐1 Page 45
240V
Kirk 400
AC
Wireless
Server
(Solo Base)
PoE
Matrix
IP PBX
See Tynetec Drg No. ZXT100 issue L sheet 7 for detailed connections
Description
700VA UPS
Matrix Eternity IP PBX
PoE Injector
Kirk 400 Wireless Server (Solo Base)
2 Channel Multi Cell Repeater
Spectralink 7202 DECT Phone & Charger
Spectralink 7212 DECT Phone & Charger
Desk CLI Telephone
Kirk Repeater Programming Kit
12V 2A Boxed PSU
12V 3.4Ah Rechargeable Battery
DECT Telephones (max 12)
Repeaters (max 6)
12V DC PSU
2 Channel Multi Cell Repeaters
240V
AC
Notes
1 per site
1 per site
1 per site
1 per site
max 6 per site
max 12 per site
1 per site
1 off purchase
1 per site
1 per PSU