TrimTrac ProE Locator Technical Manual page 224

Parameter
Runtime LPA-based
Countdown, T30
Runtime LPA-based
Query
Runtime LPA-based
Reading
Runtime LPA-based Reset
Confirmation
Runtime Motion-based
Runtime Motion-based
Countdown, T29
Runtime Motion-based
Query
Runtime Motion-based
Reading
Runtime Motion-based
Reset Confirmation
Scheduled Hours Daily
Start Time, T27
Scheduled Hours First
Weekly Work Day
Scheduled Hours Flag
Scheduled Hours Mode
Scheduled Hours Work
Day Length, T28
Scheduled Hours Work
Days per Week
Scheduled Report Mode
Scheduled Report Time,
T18
Security Password
SIM PIN
Unit/Notes
In Hours (0=No Countdown, 1-990)
0=Report Only (No Reset); 1=Report with Reset
Accumulated seconds since last reset, always 10 digits
0=Report without Reset; 1=Report with Reset;
2=Disabled
0=Disabled; 1=Enabled
In Hours (0=No Countdown, 1-990)
0=Report Only (No Reset); 1=Report with Reset
Accumulated seconds since last reset, always 10 digits
0=Report without Reset; 1=Report with Reset;
2=Disabled
In Seconds (0 – 86399) after 12:00AM UTC.
0=Sunday; 1=Monday; 2=Tuesday; 3=Wednesday;
4=Thursday; 5=Friday; 6=Saturday (All relative to UTC)
0=Normal; 1=Violation
0=Disabled; 1=Enabled
In Seconds (0 – 86400)
1= One Day; 2=Two Days; 3=Three Days; 4=Four Days;
5=Five Days; 6=Six Days; 7=Seven Days
0=None; 1=Daily; 2=Weekly
In Seconds (0-604799)
Always 8 alphanumeric characters, UPPER CASE
ONLY.
If used, must be between 4 and 8 digits.
Default Messages
0 >STKZ, >RTKZ
>QTKM
>RTKM
>RTKM
0 >STKZ, >RTKZ
0 >STKZ, >RTKZ
>QTKM
>RTKM
>RTKM
0 >STKZ, >RTKZ
1 >STKZ, >RTKZ
>RTKP, >RTKS
0 >STKZ, >RTKZ
43200 >STKZ, >RTKZ
5 >STKZ, >RTKZ
0 >STKX, >RTKX
0 >STKX, >RTKX
00000000 >STK(all),
>QTK(all)
<Empty> >STKP
TrimTrac ProE Locator Technical Manual v2.0e 206
Command
AT+CTKZ
AT+CTKZ
AT+CTKZ
AT+CTKZ
AT+CTKZ
AT+CTKZ
AT+CTKZ
AT+CTKZ
AT+CTKX
AT+CTKX
AT+CTKP
AT+CTKP