Table 99, Read-Only Parameters - TrimTrac ProE Locator Technical Manual

Parameter
Runtime Motion-based Reading
Runtime LPA-based Reading
Runtime Motion-based Reset
Confirmation
Runtime LPA-based Reset
Confirmation
Battery Change Week
Battery Change Time
Firmware Version
Output 1 Status
Output 2 Status

Table 99, Read-only Parameters

Value
Accumulated seconds since last reset, always 10 digits
Accumulated seconds since last reset, always 10 digits
0=Report without Reset; 1=Report with Reset; 2=Disabled
0=Report without Reset; 1=Report with Reset; 2=Disabled
GPS Week Number, always 4 digits
Seconds into GPS Week, always 6 digits
Numeric String
0=Output Low; 1=Output High; 2=No Change (STKU-only); 3=No
Module Attached
0=Output Low; 1=Output High; 2=No Change (STKU-only); 3=No
Module Attached
Messages
>RTKM
>RTKA
>RTKU
TrimTrac ProE Locator Technical Manual v2.0e 200