Table 73, Query_Position Message - TrimTrac ProE Locator Technical Manual

new STATUS_MSG and the most recently logged REPORT_POS (in a single
SMS message if Communication Mode is set "0=SMS") if:
1. QUERY_POSITION has the Position Query Mode set "L=Status
Report with Last Logged Position"; OR
2. QUERY_POSITION has the Position Query Mode set "S= Compute if
Position Aged", but there has been no motion since the last logged
position (i.e. Position Aged is set "0=Current"); OR
3. No GPS fix was achieved prior to expiration of the GPS Fix Timeout
specified in the QUERY_POSITION message and:
a. QUERY_POSITION has the Position Query Mode set "S=
Compute if Position Aged" and there has been motion since the
last logged position (i.e. Position Aged is set "1=Aged"); OR
b. QUERY_POSITION Position Query Mode is set "P=Compute
New Position Fix".
The new STATUS_MSG will have the TriggerType set to "3=Query" and the
Position Aged flag will be set '1'=Aged if there has been motion since the last
logged position; else the Position Aged flag will be set "1=Current".
>QTKABCCCC;PW=PPPPPPPP;ID=YYYYYYYY;*ZZ<
A
Always 'D': Indicates a query Position message.
B
Position Query Mode. S=Compute if Position Aged;
P=Compute New Position Fix; L=Status Report with Last
logged position
CCCC Position Query Fix Timeout. In Seconds (10-3600). Note:
Temporarily overrides current FIX Timeout, T2, if Position
Query Mode set to "S=Compute" and report current position.
Settings longer than 600 minutes are generally not
recommended. No default value.
PPPPPPPP
Security Password
CASE ONLY.
YYYYYYYY
Unit ID. Always 8 alphanumeric characters, UPPER CASE ONLY
ZZ
Checksum.

Table 73, QUERY_POSITION Message

.
Always 8 alphanumeric characters, UPPER
. Default 00000000
TrimTrac ProE Locator Technical Manual v2.0e 166