Table 95, Gprs Communication Provisioning Read/Write Parameters - TrimTrac ProE Locator Technical Manual

GPRS Communication Provisioning Read/Write Parameters :
Parameter
GPRS APN
GPRS Username
GPRS Password
TrimTrac Session Keep-
alive Timeout, T25
GPRS Session Protocol
GPRS Transport Protocol
GPRS Session Timeout,
T26
GPRS Destination
Address

Table 95, GPRS Communication Provisioning Read/Write Parameters.

Unit/Notes
Access Point Name (APN) Web address up to 40 case
sensitive alphanumeric characters as assigned by GPRS
network operator. Example: "apn.trimble.com".
Up to 40 case sensitive alphanumeric characters
Up to 20 case sensitive alphanumeric characters
In Seconds (0=Never; 1 –43200) Note: Idle time before
sending "Keep-alive" packet. Only TrimTrac Session
Protocol is enabled.
0=None; 1=TrimTrac Session Protocol (See Separate ICD
Document, v1.0)
0=UDP (TrimTrac Session Protocol mandatory); 1=TCP
In Seconds (0=Never; 1–43200) Note: Idle time before
closing current GPRS session and opening a new GPRS
session.
GPRS destination address in the following format:
111.222.333.444:12345. This represents an IP Address
and Port Number pair, maximum number string up to 21
characters Note: IP_Address and Port to which all GPRS
packets will be sent (See "SMS Destination Address" for
SMS messages).
Default Messages Command
<Empty>
>STKJ
>QTKJ AT+CTKJ
>RTKJ
<Empty>
<Empty>
300
0
>STKF
>QTKF AT+CTKF
1
>RTKF
0
0.0.0.0:0
TrimTrac ProE Locator Technical Manual v2.0e 194