Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S. www.nautilusinternational.com | Printed in China | © 2014 Nautilus,

Inc. | ® indicates trademarks registered in the United States. These marks may be registered in other nations or otherwise protected by common law. Bowflex, the B logo, and Bowflex Max Trainer are trademarks owned by or

licensed to Nautilus, Inc.

Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand

all Warnings on this machine.

• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings could cause

injury to the service technician or bystanders.

• Keep bystanders and children away from the product being serviced at all times.

• Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.

• Disconnect all power to the machine before you service it.

• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these

components. Do not try to do heavy or awkward steps on your own.

• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine replacement parts can cause a

risk to users, keep the machine from operating correctly and will void the warranty.

• Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or replac-

ing components. If necessary request replacement warning stickers or placards from Nautilus customer service.

• Do not try to change the design or functionality of the machine being serviced as this can adversely effect user safety and will void the warranty.

• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct performance.

Tools Required (not included)

#2 Phillips screwdriver

5mm hex wrench

6mm hex wrench

9/16" or 14mm Socket and Wrench

Crank Puller (non-handled,

JIS/ISO square taper

with M22x1.0 threads)

Replace the Hardware of the Drive Pulley

on the Bowflex Max Trainer

Bowflex

Customer Service at 1-800-605-3369.