Bowflex Max Trainer M3 Service Manual page 17

Note: The Bowflex Max Trainer M3 is used in the following images. The
®
procedure is the same for the M5 model.
1. With power supplied to the machine, adjust the resistance to the maxi-
mum setting.
2. Unplug the AC Adapter from the machine and wait 5 minutes.
3. Using a #2 Phillips screwdriver, remove the indicated (by ovals) screws
and only loosen the lowest indicated screw (arrow) from the Right Fan
Cover.
Note: Loosen the lowest screw by at least 3 full rotations.
4. The Right Fan Cover has a tab that needs to be
pushed upward to clear the loosened screw. While push-
ing up on the tab, remove the Right Fan Cover from the
assembly.
Note: the AC Power Cable is attached to the inside
of the Right Fan Cover. Be sure not to crimp the cable
by placing the Right Fan Cover close to the front of the
machine.
Tab
5. At the maximum resistance setting, the outer edge of the Brake Magnet
should line up with the outer edge of the Brake Disc.
17