Bowflex Max Trainer M3 Service Manual page 73

Note: The Bowflex Max Trainer
procedure is the same for the M5 model.
1. Unplug the AC Adapter from the machine and wait 5 minutes.
2. Using a #2 Phillips screwdriver, remove the 4 screws (2 indicated on
one side) from the Console Assembly.
3. Carefully lift the Console Assembly and expose the Cable Connections.
4. Carefully disconnect the Cables noting their locations.
Note: do not crimp any of the Console Cables.
M3 is used in the following images. The
®
Console Assembly
73
M5
only