Bowflex Max Trainer M3 Service Manual page 93

25. Fully tighten the hardware that attaches the Rail Assembly to the new
Frame Assembly (from Step 16), and then the hardware just installed to
the Stabilizer Assembly.
26. Reconnect the cables from the Console Assembly, and attach it to the
Frame Assembly with a a #2 Phillips screwdriver.
27. Cut the Shipping Zip-Ties and Attach the Rear Shroud and Caps to the
Frame Assembly
NOTICE: Place the inside hook of the Rear Shroud on the Frame Assem-
bly and then pivot it up into place.
X1
2
E
#2
93