Connecting The Dc Power Supply; Dc Power Specifications - Cisco CISCO2515-RF - 2515 Router User Manual

Connecting the DC Power Supply

Connecting the DC Power Supply
Some router models offer an optional DC power supply. This section describes the DC
power supply specifications and wiring.
Warning
area is where access can only be gained by service personnel through the use of a special
tool, lock and key, or other means of security, and is controlled by the authority responsible
for the location. (To see translated versions of the warning, refer to the Regulatory
Compliance and Safety Information document that accompanied your router.)
DC Power Specifications
The DC power supply is intended for use in DC operating environments. Table 3-1 lists the
power supply specifications.
Table 3-1
Description
Power (input)
Wire gauge for power connections 14 AWG
1. AWG = American Wire Gauge.
3-10 Router Installation and Configuration Guide
This unit is intended for installation in restricted access areas. A restricted access
DC Power Supply Specifications
Design
Specification
40W, –40 to –72 VDC
1