Connecting The Dc Power Supply; Dc Power Specifications - Cisco 2500 Series Installation And Configuration Manual

Installing the Router
vertical wall stud. (See
the wall when cables are attached.
For the best ventilation of the chassis, mount the chassis with the power supply and fan at the top.
Make sure there is clearance between the router and the wall.
Figure 3-9: Wall-Mounting the Chassis

Connecting the DC Power Supply

The multiport serial router has an optional direct current (DC) power supply. This section describes the
DC power supply specifications and wiring.

DC Power Specifications

The DC power supply is intended for use in DC operating environments.
specifications.
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis2500/2520/2520_23/c2520ins.htm (6 of 14) [10/27/2000 3:07:47 PM]
Figure 3-9.) This position will prevent the chassis from pulling away from
Table 3-1 lists the power supply