Troubleshooting; Bluetooth Setup And Connection; Cannot Connect; Figure 79 - Cannot Connecte - Geokon GK-405 Instruction Manual

Vibrating wire readot

Hide thumbs Also See for GK-405:

Table of Contents

6. TROUBLESHOOTING

The following sections show common error messaging that may be displayed when setting up

and trying to connect to the Remote Module via Bluetooth. Also included are potential solutions

to the errors shown.

6.1.1 "Cannot Connect...the passcode is incorrect"

"Cannot connect. Your device did not connect with GK405SNxxxxxxxxx. The

connection failed or the passcode is incorrect."

Figure 79 - Cannot Connect Error Message (Nautiz X8 Shown)

The message shown in Figure 79 is most commonly caused by tapping the "Connect"

menu item from Bluetooth Device Context Menu (see Figure 80 on the following page)

after a successful pairing has been established. If the Connect menu item has been

pressed and the error message from Figure 79 is seen, the pairing is not corrupted and

does not need to be set up again.

Table of Contents