User Interface; Overview; Live Readings Screen - Raw Readings; Figure 29 - Live Readings - R - Geokon GK-405 Instruction Manual

Vibrating wire readot

Hide thumbs Also See for GK-405:

Table of Contents

3. USER INTERFACE

Following a successful Bluetooth connection, the GK-405 VWRA will boot up displaying the

screen shown in Figure 29. This is the Live Readings screen and it is shown in "Raw Readings"

mode, meaning that output will be displayed in "raw" form (usually digits) since no sensor has

been selected to supply parameters for engineering unit display. The following sections describe

the GK-405 VWRA user interface in detail.

3.2 Live Readings Screen – Raw Readings

Figure 29 shows a typical vibrating wire piezometer output in digits and thermistor output in

degrees Celsius.

Figure 29 - Live Readings – Raw Readings

In "Raw Readings" mode, the two onscreen controls that control gage measurement are "Display

Mode" and "Sensor Index".

Table of Contents