Figure 39 - Workspace Folder - Geokon GK-405 Instruction Manual

Vibrating wire readot

Hide thumbs Also See for GK-405:

Table of Contents

If the workspace name is new to the GK-405 VWRA then a workspace folder selection

window is displayed (Figure 39). Select the appropriate folder (or use the default) and a

new workspace is created with the name entered above.

3.4.1.2 Add Project

This menu item allows new projects to be created and added to a workspace. After

tapping on this Context Menu item, the Project Settings Dialog will be displayed and can

be edited. See Section 4.1 for more information regarding project configuration. This

menu item will only be enabled when the workspace is selected.

3.4.1.3 Add Sensor

This menu item allows new sensor configurations to be created and added to a project.

After tapping on this Context Menu item, the Sensor Settings Dialog will be displayed

and can be edited. See Section 4.2 for more information regarding sensor configuration.

This menu item will only be enabled when a project is selected.

3.4.1.4 Delete Element

Project Explorer Elements can be deleted using this Context Menu item. A confirmation

dialog will be displayed before the element is deleted.

3.4.1.5 Edit Settings

This menu item allows configuration editing of the selected Project Explorer Element.

See Section 3.5.2 for more information regarding configuration editing.

Figure 39 - Workspace Folder Selection

Table of Contents

Troubleshooting