Sensor Configuration; Sensor Settings Page One, General Sensor Information - Geokon GK-405 Instruction Manual

44

4.2 Sensor Configuration

The Sensor settings window (Figure 71) manages sensor configuration options through several
different screens. The user can easily navigate between screens by tapping on the left and right
arrows near the bottom of the screen (

4.2.1 Sensor Settings Page One, General Sensor Information

A detailed explanation of the parameters for the General Sensor Information window
appears below.
(Note: At this time, sensors are always "Enabled" and the selection box located at the
top-right hand side of the window will be inactive.)
Sensor name: This is a user assigned sensor name, which is displayed in the project
explorer. A descriptive name allows the user to quickly pick the sensor from the list.
Description: Verbose description of the sensor, which can provide clues to its location,
purpose, etc.
Sensor ID: This is a system-generated sensor ID assigned at the time of sensor configuration
creation. This value uniquely identifies the sensor to this application and cannot be changed
by the user.
Date created: The system-generated date of the sensor creation is useful for audit purposes.
This field cannot be edited and is set to the date when the sensor is enabled.
Sensor Type: The sensor type is selected from the list of supported sensor types. (Vibrating
Wire is currently the only supported sensor type.)
).
Figure 71 - General Sensor Information Window