Edit Settings; Remote Connect With; Figure 50 - Live Readings - W; Figure 51 - Remote Modulen - Geokon GK-405 Instruction Manual

Vibrating wire readot

Hide thumbs Also See for GK-405:

Table of Contents

Sensor Selection Screen: This option returns operation to the "Sensor Selection Screen"

where other sensors may be selected, edited, or created. See Section 3.3 for more

information.

Landscape Mode: This "View" option and its converse, "Portrait Mode", allow the

orientation of the screen to be changed. Figure 50 shows the "Live Readings – With

Selected Sensor" screen in "Landscape Mode".

Figure 50 - Live Readings - With Selected Sensor (Landscape Mode)

3.5.2 Edit Settings

As with the Context Menu (Section 3.4.1), tapping the "Edit Settings" menu will invoke

the Settings Editor for the currently selected Project Explorer element. See the Section

4.1, "Project Configurations" for more information on these settings.

If the application displays the status, "Connection Failed" as shown in Figure 51 and

Figure 52 at any time, the steps listed on the following page should be taken.

Figure 51 - Remote Module Not Found

Figure 52 - Default Initial Screen

Table of Contents