Figure 53 - Remote Connect With; Figure 54 - Select Com Port; Figure 55 - Sensor Selection - Geokon GK-405 Instruction Manual

1) Make sure the remote is turned on (blue light blinking).
2) Select the "Application" menu option "Remote Connect with" (Figure 53) and pick
the COM port previously established in Section 2.3 (Figure 54).

Figure 53 - Remote Connect With...

A successful connection is reflected in the Main Screen status as shown by the red ovals in
Figure 55.
Figure 55 - Sensor Selection Screen, Remote Module Connected

Figure 54 - Select COM Port

33