Esc+~(Null) Multi Cut - SATO WS4 Series Programming Reference Manual

System
Available for
WS4 series

ESC+~(NULL) Multi Cut

Multi Cut
ESC
Hex code
<1B>16
Default setting aaaa=1
When printer is powered off
Persistence of
Validity in a job
the command
Validity after a job
[Function]
Specifies the number of labels to print between each cut.
[Format]
<~(NULL)>aaaa
●Parameter
a [Number of prints before cutting]
[Coding Example]
<A>
<V>100<H>200<P>2<L>0202<OA>ABC
<Q>4
<~>2
<Z>
(1) Normal cut mode
1. Valid only for Cutter models.
2. If this command is not specified in Cutter mode, each label will be cut off after printed.
3. In case the parameter "a" is set to 0, no label will be cut.
4. The product of Qty and value of "aaaa" shall not exceed the maximum number "999999".
5. This command <~> shall be put after Qty<Q>. <Q>, in this case, is to specify number of sheets to be cut.
6. This command may not be used in combination with other cut commands, <CT> or <~A>.
~ (NULL)
<7E> (<00> )
16 16
Set Parameter will not be retained
Set Parameter will be retained until next valid setting
Set parameter will be the default value for the next job<A>.
= Valid range : 0 to 9999
Complete cut
2 pcs
Label feed direction
ESC+~(NULL)
Parameter
aaaa
Complete cut Complete cut
4 pcs
176
Complete cut