Print Speed - SATO CL412E Operator And Technical Reference Manual

Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
SATO CL Series "e" Printers

Print Speed

<ESC>CSa
a = Designates the speed selection (see note 2)
Example: <ESC>CS6
Placement: Must be placed immediately after <ESC>A and
immediately before <ESC>Z in its own separate
data stream
Default: As previously set in the printer configuration
To specify a unique print speed through software for a particular label.
This allows flexibility in finding the best performance and quality for
the particular label format, media, and ribbon. All subsequent labels
will print at this speed unless the speed is changed with this command
or through the Operator Panel.
>CS6
There is no printer output for this command. It sets the print speed of
the printer.
1. This becomes the new setting for all subsequent print jobs, unless
changed. The setting is stored in non-volatile memory and is not
affected by cycling the power. The allowable speed ranges are:
CL408e/CL412e
1 = 2 ips (50 mm/sec)
2 = 3 ips (75 mm/sec)
3 = 4 ips (100 mm/sec)
4 = 5 ips (125 mm/sec)
5 = 6 ips (150 mm/sec)
PN 9001074 Preliminary
Section 5. Programming Reference
CL608e/CL612e
4 = 4 ips (100 mm/sec)
6 = 6 ips (150 mm/sec)
8 = 8 ips (200 mm/sec)
Page 5-67