Adjusting The Print Speed - SATO CL4NX Operator's Manual

5
Press the / buttons to select a value.
The setting range is from 1 to 10. 1 is the lightest
and 10 is the darkest.
6
Press the right soft button or
save the value.
5.4.2

Adjusting the Print Speed

The adjustment of the print speed not only changes the speed of printing but also affects the print quality.
The setting range of the print speed varies depending on the following print resolution:
<CL4NX>
• Resolution 203 dpi ( 8 dots/mm): 2 to 10 (inches/sec)
• Resolution 305 dpi ( 12 dots/mm): 2 to 8 (inches/sec)
• Resolution 609 dpi ( 24 dots/mm): 2 to 6 (inches/sec)
<CL6NX>
• Resolution 203 dpi (8 dots/mm): 2 to 10 (inches/sec)
• Resolution 305 dpi (12 dots/mm): 2 to 8 (inches/sec)
Note (CL4NX only)
If the optional linerless kit is installed, the setting range will be from 2 to 6 ips (inches/sec) regardless of the
print resolution of the printer.
The adjustment procedure for the print speed is as follows:
1
When the printer is in online mode, press
the button to change the printer to
offline mode.
2
Press the button to show the Settings
menu.
5 Cleaning and Performing Printer Adjustments
button to
CL4NX/CL6NX Operator Manual
225