Data Matrix, Data Format - SATO CL412E Operator And Technical Reference Manual

Two-Dimensional Bar Codes

Data Matrix, Data Format

Command Structure
Command Function
Printer Input
Printer Output
Special Notes
SATO CL Series "e" Printers
<ESC>BXaabbccddeeefffghh
aa = Format ID. 01-06 or 11-16. The values 07 and 17
will not be accepted by the printer.
bb = Error correction level. 00 ,05, 08, 10, 14 or 20 or 200.
All other values will be processed as a 00.
cc = Horizontal cell size. 03 - 12 dots/cell.
dd = Vertical cell size. 03 - 12 dots/cell.
eee = Number of cells in one line. Must use 000 to optimize.
fff = Number of cell lines. Must use 000 to optimize.
g = Mirror Image
0 = Normal Print
1 = Reverse Print
hh = Guide Cell Thickness. 01-15. 01 indicates normal type.
Example: <ESC>BX03080505000000001
Placement: Immediately preceding data to be encoded
Default: None
To designate the format for a Data Matrix two-dimensional bar code
image on a label.
There is no printer output as a result of this command. See the
<ESC>DC Print Data command for printer output.
1. If any of the parameters entered are outside the valid range, a
symbol will not be printed when the <ESC>DC Print Data
command is sent to the printer.
2. The number of cells per line (eee) and the number of cell lines (fff)
should be specified as all zeroes, allowing the printer to
automatically calculate the optimum configuration for the symbol.
3. The Reference Point for the Data Matrix symbol is the upper-left
corner.
4. The Format ID specified for "aa" is defined by the following table.
The printer only supports the Format ID's defined in the table.
PN 9001074 Preliminary
Section 5. Programming Reference
BX05051010000000001
Page 5-105