Error Signals - SATO CL412E Operator And Technical Reference Manual

Section 7. Troubleshooting

ERROR SIGNALS

The LCD Display, Front Panel LED Indicators and Buzzer provide a visual/audio
indication of the type of error encountered.
LED LCD
MESSAGE
Error On Machine Error
Error On EEPROM Error
Error On Head Error
Error On Sensor Error
Error Blinks Card R/W Error
Error Blinks Card Low Battery
Error Blinks Head Open
Error Blinks Cutter Error
Error On Parity Error
Line Blinks
Error On Overrun Error
Line Blinks
Error On Framing Error
Line Blinks
Error On Buffer Over
Line Blinks
Error Blinks Paper End
Label On
Error Blinks Ribbon End
Ribbon On
Error Blinks Media Error
Label Blinks
Ribbon Blinks
Line Blinks
Page 7-10
AUDIBLE ERROR CONDITION
BEEP
1 Long Machine Error
1 Long EEPROM Read/Write
1 Long Head
3 Short Sensor
1 Long Memory Card Read/Write
1 Long Memory Card Battery Low
3 Short Head Open
3 Short Cutter
3 Short RS232 Parity Error
3 Short RS232 Overrun Error
3 Short RS232 Framing Error
3 Short Buffer Overflow
3 Short Label End
3 Short Ribbon End
3 Short Media Error
None Ribbon Near End
None Buffer Near Full
PN 9001074 Preliminary
TO CLEAR
Cycle power on/off
Cycle power on/off
Cycle power on/off
Cycle power on/off
Cycle power on/off
Cycle power on/off
Close head lever
Cycle Power On/Off
Cycle power on/off
Cycle power on/off
Cycle power on/off
Cycle power on/off
Open/close Head Lever
Open/close Label Hold-
down
Open/close Head Lever
Open/close Label Hold-
down
Open/close Head Lever
Replace ribbon with full roll
Slow down transmission
rate
SATO CL Series "e" Printers