SATO CL412E Operator And Technical Reference Manual page 239

INSTRUCTION DESCRIPTION
BJFaaaaaaaa Initialize Memory Card. Initializes the Memory Area and formats it for
use. Should be preceded by the Memory Area Select command for the
memory area to be initialized.
aaaaaaaa
BJRabbccdd TrueType Font Recall. Recalls a previously stored bit mapped
eeeeff..f TrueType font for use.
a
bb
cc
dd
eeee =
ff...f =
BJS Expanded Memory Status. Reports the status of the currently active
Memory Card to the host by printing a status label.
BJTaa,bb,cc, TrueType Font Recall. Recalls a previously stored bit mapped
dd,ee,fff,gg..g TrueType font for use.
aa
bb
cc
dd
ee
f f f f =
gg...g =
CCa Memory Area Select. Selects the Memory area for all following
Expanded Memory commands.
a
b
GCaaa Recall BMP Graphic. Recalls BMP graphic files stored in Expanded
Memory.
GIabbbcccddd Store Custom Graphics. Stores a graphic image in the memory card
ee...e to be called later for printing on a label.
a
bbb =
ccc
ddd =
ee...e =
GRccc Recall Custom Graphics. Recalls for printing the graphic image
stored by the GI command.
ccc
SATO CL Series "e" Printers
= 8 character alphanumeric password
= Font ID (1-9
= Horizontal Expansion (01-12)
= Vertical Expansion (01-12)
= Character pitch (01-99)
Number of characters
Data to be printed using font
= Font ID (01-99
= Horizontal Expansion (01-12)
= Vertical Expansion (01-12)
= Reserved, always 00
= Character pitch (01-99)
Number of characters
Data to be printed using font
= 1 Memory Area 1
= 2 Memory Area 2
= Specifies format of data stream to follow
B Binary
H Hexadecimal
Number of horizontal 8 x 8 blocks
= Number of vertical 8 x 8 blocks
Graphics storage number (001-999)
Data to describe the graphic image
= Storage number (001-999)
PN 9001074 Preliminary
Appendix A: Command Quick Reference
PAGE
Page 5-
Page 5-
Page 5-
Page 5-
Page 5-
Page 5-
Page 5-
Page 5-
Page A-11